OPA4322SAIPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OPA4322 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-0.9/+-2.75/1.8/5.5V |
| Number of Channels | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 65mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 20MHz |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 20MHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4322SAIPW Overview
The linear amplifier is packaged in a 16-TSSOP (0.173, 4.40mm Width) case. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 16h termination of the year. The total number of pins on linear amplifier is 16. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 1.4mA. Maintain 130dB as the voltage gain. 4 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
OPA4322SAIPW Features
16 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA4322SAIPW Applications
There are a lot of Texas Instruments OPA4322SAIPW Instrumentational OP Amps applications.
- Information processing
- Exponential operation circuits
- High gain DC amplifier
- Polarized electrodes
- Communication
- Division circuits
- Portable docking station
- High/low-pass filter circuit
- Blood pressure sensors
- Laptop
