OPA4330AIRGYT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA4330 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-0.9/+-2.75/1.8/5.5V |
| Number of Channels | 4 |
| Operating Supply Current | 21μA |
| Nominal Supply Current | 35μA |
| Output Current | 5mA |
| Slew Rate | 0.16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 350 kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 8μV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 10Hz |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Max I/O Voltage | 50μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4330AIRGYT Overview
Packaging for the buffer amplifier is in the form of a 14-VFQFN Exposed Pad case. An op amp ic of the Zero-Drift type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 50μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~150°C. A supply current of 21μA can be used to operate this linear amplifier. Op amp is a member of the 115dB's 115dB family. The op amp ic has 4 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. An buffer amplifier is packed in a TR-shape according to the design.
OPA4330AIRGYT Features
14 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA4330AIRGYT Applications
There are a lot of Texas Instruments OPA4330AIRGYT Instrumentational OP Amps applications.
- Automatic control
- Addition operation circuits
- earphone
- Non-polarized electrodes
- Measurements of Wheatstone bridge
- Industrial applications including automation
- Fast A/D and D/A converters
- Portable electronic products powered by batteries
- single/dual op amp sum and difference circuits
- Power control
