Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
MicroAmplifier™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5.5V |
Terminal Pitch |
1.27mm |
Base Part Number |
OPA4344 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Power Supplies |
3/5V |
Number of Channels |
4 |
Operating Supply Current |
150μA |
Nominal Supply Current |
1mA |
Slew Rate |
0.8V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
76 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Output Current per Channel |
15mA |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
1MHz |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
122dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
90.46dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7.5V |
Voltage - Input Offset |
200μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Max I/O Voltage |
1mV |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA4344UAG4 Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5.5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 150μA , this buffer op amp will be able to operate. 122dB should be the voltage gain. Instrumentation amplifier has 4 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Buffer op amp series numbers are indicated by the MicroAmplifier?.
OPA4344UAG4 Features
14 Pins
supply voltage of 5.5V
122dB voltage gain
Output Type: Rail-to-Rail
OPA4344UAG4 Applications
There are a lot of Texas Instruments OPA4344UAG4 Instrumentational OP Amps applications.
- Commercial audio systems
- pH (acidity)
- Video data acquisition
- Proportional counter tubes
- Non-polarized electrodes
- Exponential operation circuits
- Signal amplification
- Tablets
- Subtraction operation circuits
- High speed sample