banner_page

OPA4364AIDRG4

85mA per Channel 1pA 74 dB Instrumentational OP Amps 0.00001μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA4364 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA4364AIDRG4
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 718
  • Description: 85mA per Channel 1pA 74 dB Instrumentational OP Amps 0.00001μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA4364 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3.6V
Terminal Pitch 1.27mm
Base Part Number OPA4364
Pin Count 14
Output Type Rail-to-Rail
Operating Supply Voltage 2.75V
Number of Elements 4
Power Supplies 2/5V
Operating Supply Current 1.1mA
Nominal Supply Current 5.6mA
Slew Rate 5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 74 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±0.9V~2.75V
Output Current per Channel 85mA
Input Offset Voltage (Vos) 2.5mV
Bandwidth 7MHz
Unity Gain BW-Nom 7000 kHz
Voltage Gain 90dB
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 81.94dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 5.5V
Voltage - Input Offset 1mV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00001μA
Programmable Power NO
Nominal Gain Bandwidth Product 7MHz
Max I/O Voltage 2.5mV
Input Offset Current-Max (IIO) 0.00001μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA4364AIDRG4 Overview


In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 3.6V. Instrumentation amplifier is a part of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 1.1mA. There should be no change in the voltage gain at 90dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A total of 4 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. The instrumentation amplifier is packed in the form of TR.

OPA4364AIDRG4 Features


14 Pins
supply voltage of 3.6V
90dB voltage gain
Output Type: Rail-to-Rail

OPA4364AIDRG4 Applications


There are a lot of Texas Instruments OPA4364AIDRG4 Instrumentational OP Amps applications.

  • Blood pressure sensors
  • Tablets
  • Fission chambers
  • High gain DC amplifier
  • Oscilloscopes
  • Automotive sensors
  • Car stereo
  • Industrial control system
  • Portable electronic products powered by batteries
  • Large motor controllers

Write a review

Note: HTML is not translated!
    Bad           Good