Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
OPA4364 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
2.75V |
Number of Elements |
4 |
Power Supplies |
2/5V |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
5.6mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
85mA |
Input Offset Voltage (Vos) |
3mV |
Unity Gain BW-Nom |
7000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
81.94dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
5.5V |
Voltage - Input Offset |
1mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
7MHz |
Max I/O Voltage |
3mV |
Wideband |
NO |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA4364AQDRQ1 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . 100dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. The linear amplifier is packaged by using a TR axis. The Automotive, AEC-Q100 indicates the series number of the op amp.
OPA4364AQDRQ1 Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
OPA4364AQDRQ1 Applications
There are a lot of Texas Instruments OPA4364AQDRQ1 Instrumentational OP Amps applications.
- Vehicle electronics
- Medical imaging
- Active probe
- Measurements of Wheatstone bridge
- Home audio systems
- Automation control systems
- Multiplication circuits
- Test and measurement instruments
- Gaming industry
- Communication