OPA445APG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 40V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA445 |
| Pin Count | 8 |
| Operating Supply Voltage | 45V |
| Number of Channels | 1 |
| Operating Supply Current | 4.2mA |
| Nominal Supply Current | 4.7mA |
| Output Current | 15mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 20V~90V ±10V~45V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -40V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 50V |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 40V |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA445APG4 Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 40V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electronic part is recommended for mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -25°C~85°C . An 4.2mA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 110dB is the best course of action. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 45V.
OPA445APG4 Features
8 Pins
supply voltage of 40V
110dB voltage gain
OPA445APG4 Applications
There are a lot of Texas Instruments OPA445APG4 Instrumentational OP Amps applications.
- Laptop
- Video computer boards
- Hand-held batteries
- Voltage regulation circuit
- Professional videography
- Test equipment
- Differentiator circuits
- Switching amplifier
- Ultrasound transducers
- Instrumentation
