OPA445AUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 40V |
| Base Part Number | OPA445 |
| Pin Count | 8 |
| Operating Supply Voltage | 45V |
| Number of Channels | 1 |
| Operating Supply Current | 4.2mA |
| Nominal Supply Current | 4.7mA |
| Output Current | 15mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 20V~90V ±10V~45V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -40V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 50V |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 40V |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA445AUG4 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 40V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -25°C~85°C . The buffer amplifier is capable of operating from a supply current of 4.2mA . There should be no change in the voltage gain at 110dB. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 45V voltage.
OPA445AUG4 Features
8 Pins
supply voltage of 40V
110dB voltage gain
OPA445AUG4 Applications
There are a lot of Texas Instruments OPA445AUG4 Instrumentational OP Amps applications.
- Switching amplifier
- Video data acquisition
- Automation control systems
- Portable media players
- Scintillation detectors
- E-book readers
- Home audio systems
- Medical instruments
- Addition operation circuits
- Mobile phone
