OPA561PWP/2K
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA561 |
| Pin Count | 20 |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 60mA |
| Output Current | 1.2A |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 7V~15V ±3.5V~7.5V |
| Output Current per Channel | 1.2A |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 17MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 92.04dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | YES |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 17MHz |
| Max I/O Voltage | 20mV |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA561PWP/2K Overview
It is packaged in an 20-PowerTSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 20 terminations over the past year. It consists of a total of 20 pins in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 20 pins. With regard to input offset voltage, instrumentation amplifier is rated at 20mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 50mA . It is recommended to keep the voltage gain at 100dB at all times. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 8V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA561PWP/2K Features
20 Pins
supply voltage of 15V
100dB voltage gain
OPA561PWP/2K Applications
There are a lot of Texas Instruments OPA561PWP/2K Instrumentational OP Amps applications.
- Multimedia playback equipment
- Logarithmic operation circuits
- High-frequency data acquisition systems
- High speed sample
- Video amplifiers
- High gain DC amplifier
- Navigation
- Video computer boards
- Television broadcasting equipment
- Communication
