OPA564AIDWDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | OPA564 |
| Pin Count | 20 |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
| Operating Supply Current | 39mA |
| Nominal Supply Current | 50mA |
| Output Current | 1.5A |
| Slew Rate | 40V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 7V~24V ±3.5V~12V |
| Output Current per Channel | 1.5A |
| Input Offset Voltage (Vos) | 20mV |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 108dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 17MHz |
| Max I/O Voltage | 20mV |
| Wideband | NO |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA564AIDWDR Overview
In the package, you will find a 20-SOIC (0.295, 7.50mm Width) Exposed Pad-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 20h termination of the year. Buffer amplifier has a total of 20 pins on it. As a reminder, this buffer op amp should be powered by 12V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 20 pins are present on the instrumentation amplifier. There is an input offset voltage of 20mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 39mA, this op amp ic can operate. Voltage gain should remain at 108dB. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 12V. TR is adopted to pack the instrumentation amplifier.
OPA564AIDWDR Features
20 Pins
supply voltage of 12V
108dB voltage gain
OPA564AIDWDR Applications
There are a lot of Texas Instruments OPA564AIDWDR Instrumentational OP Amps applications.
- Subtraction operation circuits
- Test and measurement instruments
- single/dual op amp sum and difference circuits
- Proportional counter tubes
- Active probe
- Comparator
- Ultrasound transducers
- Differentiator circuits
- Power transmission
- Fission chambers
