OPA567AIRHGT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA567 |
| Pin Count | 12 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 6mA |
| Output Current | 2A |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 2.4A |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 98.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Max I/O Voltage | 2mV |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA567AIRHGT Overview
Op amp is packaged in 12-VQFN Exposed Pad case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 12 terminations have been reported in the past few weeks. Buffer amplifier has a total of 12 pins on it. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 12 pins. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 9mA . It is recommended to keep the voltage gain at 126dB at all times. Op amp ic has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA567AIRHGT Features
12 Pins
supply voltage of 5V
126dB voltage gain
Output Type: Rail-to-Rail
OPA567AIRHGT Applications
There are a lot of Texas Instruments OPA567AIRHGT Instrumentational OP Amps applications.
- Car stereo
- Vehicle electronics
- Weighing systems
- Home audio systems
- Oscilloscopes
- Hand-held batteries
- Fast A/D and D/A converters
- Signal filtering
- High/low-pass filter circuit
- Subtraction operation circuits
