OPA569AIDWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA569 |
| Pin Count | 20 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 6mA |
| Output Current | 2A |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 2.4A |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 98.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA569AIDWP Overview
Packaging for the buffer amplifier is in the form of a 20-SOIC (0.295, 7.50mm Width) Exposed Pad case. A General Purpose-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. There have been a total of 20 terminations over the past year. Buffer amplifier has a total of 20 pins. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 20 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 9mA . 126dB should be the voltage gain. On the buffer amps, there are 1 channels that can be used. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
OPA569AIDWP Features
20 Pins
supply voltage of 5V
126dB voltage gain
Output Type: Rail-to-Rail
OPA569AIDWP Applications
There are a lot of Texas Instruments OPA569AIDWP Instrumentational OP Amps applications.
- Signal transformation
- Oscilloscopes
- Exponential operation circuits
- Video data acquisition
- Micro signal measurement
- Mobile phone
- Instrumentation
- Non-polarized electrodes
- Thermocouples
- Television
