OPA606KPG4
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.000566μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000025μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.000339μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Difet® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA606 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 500mW |
| Output Current | 10mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 13MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
OPA606KPG4 Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 3mV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. Keeping the voltage gain at 110dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Instrumentation amplifiers are numbered by their Difet? series.
OPA606KPG4 Features
8 Pins
supply voltage of 15V
110dB voltage gain
OPA606KPG4 Applications
There are a lot of Texas Instruments OPA606KPG4 Instrumentational OP Amps applications.
- Television broadcasting equipment
- Strain gauges
- Commercial audio systems
- Displayers for aircraft and air transportation control systems
- Semiconductor detectors
- ECG equipment
- Home audio systems
- High gain DC amplifier
- Signal operation
- Industrial applications including automation
