OPA615ID
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | DC Restoration |
| Subcategory | Sample and Hold Circuit |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA615 |
| Pin Count | 14 |
| Max Output Current | 5mA |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Output Current | 3mA |
| Min Input Voltage | -3.4V |
| Slew Rate | 2500V/μs |
| Amplifier Type | SAMPLE AND HOLD CIRCUIT |
| Max Input Voltage | 3.4V |
| Voltage - Supply, Single/Dual (±) | ±4V~6.2V |
| Output Current per Channel | 20mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 40mV |
| Gain Bandwidth Product | 710MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Frequency | 30MHz |
| Sample and Hold / Track and Hold | SAMPLE |
| Dual Supply Voltage | 5V |
| Input Bias Current | 3μA |
| Max I/O Voltage | 40mV |
| Input Voltage Noise Density | 4.6nV/sqrt Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
OPA615ID Overview
This package is packaged as a Tube.This is accessible in the 14-SOIC (0.154, 3.90mm Width) package to save space.Considering its high performance, it is an excellent choice for DC Restoration.Using the Surface Mount method, audio power amplifier is mounted on the PCB.The base part number is OPA615 and is used to audio amp.There are 14 pins on audio digital amplifier.Digital amplifier has 14 terminations.This audio power amplifier is included in Sample and Hold Circuit.An electric current of 13mA is supplied to audio amplifier.The board is constructed wamplifier ich 14 pins.Operating temperatures must be lower than 85°C.The operating temperature should be at least -40°C.Presently, there are a total of 1 channels that are available to users.The 5V supply voltage enables high efficiency.It is equipped with an amplifier type of SAMPLE AND HOLD CIRCUIT.In this scenario, the output current is set to 3mA.There is a supply type of Dual associated with it.
OPA615ID Features
Sample and Hold Circuit subcategory
14 pins
1 channels
OPA615ID Applications
There are a lot of Texas Instruments OPA615ID Video Amps and Modules applications.
- HiFi Audio System Equipment
- Body Control Modules
- Premium Audio
- Automotive
- Audio Test and Measurement
- Automotive head unit
- Analog and Digital Mixing Consoles
- High-End A/V Receivers
- Microphone Preamplifiers
- Car Audio
