OPA615IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | DC Restoration |
| Subcategory | Sample and Hold Circuit |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA615 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 13mA |
| Output Current | 3mA |
| Slew Rate | 2500V/μs |
| Amplifier Type | SAMPLE AND HOLD CIRCUIT |
| Voltage - Supply, Single/Dual (±) | ±4V~6.2V |
| Output Current per Channel | 20mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 40mV |
| Gain Bandwidth Product | 710MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Supply Voltage Limit-Max | 6.5V |
| Sample and Hold / Track and Hold | SAMPLE |
| Analog Input Voltage-Max | 3V |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6.5V |
| Max I/O Voltage | 40mV |
| Analog Input Voltage-Min | -3V |
| Input Voltage Noise Density | 4.6nV/sqrt Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA615IDR Overview
A Tape & Reel (TR) is used to package class d amplifier.14-SOIC (0.154, 3.90mm Width) package reduces space by making class d amp available.This is a good choice for DC Restoration because of audio amplifiers high performance.According to Surface Mount, audio power amplifier is mounted on the PCB.Audio amp to it have the same base part number OPA615.A pin count of 14 can be found on audio digital amplifier.Digital amplifier consists of 14 terminations.The audio power amplifier is included in Sample and Hold Circuit.This amplifier operates on a current supply of 13mA.Amplifier ic uses 14 pins for construction.If the temperature is less than 85°C, the system should operate.Minimum operating temperature is -40°C.The 5V supply voltage allows for high efficiency.There is a type of amplifier SAMPLE AND HOLD CIRCUIT on the audio amplifier.A value of 3mA is set for the output current in this case.A supply type of Dual is associated with it.The total number of elements in audio amplifier is 1.
OPA615IDR Features
Sample and Hold Circuit subcategory
14 pins
OPA615IDR Applications
There are a lot of Texas Instruments OPA615IDR Video Amps and Modules applications.
- HiFi Audio System Equipment
- Automotive
- Microphone Preamplifier Circuit
- Premium Audio
- Broadcast Studio Equipment
- Audio Test and Measurement
- Automotive active noise cancellation
- Set-Top Box
- Microphone Preamplifiers
- Car Audio
