OPA656UB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA656 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 16mA |
| Slew Rate | 295V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 230MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 500000 kHz |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Voltage - Input Offset | 100μV |
| Settling Time | 16 ns |
| -3db Bandwidth | 500MHz |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 600μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA656UB Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Voltage Feedback type. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 600μV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 14mA. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier.
OPA656UB Features
8 Pins
supply voltage of 5V
65dB voltage gain
OPA656UB Applications
There are a lot of Texas Instruments OPA656UB Instrumentational OP Amps applications.
- Test and measurement instruments
- Proportional counter tubes
- Non-polarized electrodes
- Video data acquisition
- Differentiator circuits
- Mobile phone
- High/low-pass filter circuit
- Computer workstations
- Fast A/D and D/A converters
- High input resistance broadband
