OPA683IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA683 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 940μA |
| Nominal Supply Current | 1.03mA |
| Slew Rate | 540V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 51 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 200MHz |
| Gain Bandwidth Product | 1.44GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 145000 kHz |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 12 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 3.5mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA683IDBVR Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Current Feedback-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 6 mark. There are a total of 6 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 940μA . The op amp is rated for an operating supply voltage of 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This linear amplifier pack is based on the TR axis.
OPA683IDBVR Features
6 Pins
supply voltage of 5V
OPA683IDBVR Applications
There are a lot of Texas Instruments OPA683IDBVR Instrumentational OP Amps applications.
- Proportional counter tubes
- Non-polarized electrodes
- High gain DC amplifier
- Industrial applications including automation
- Radiation thermometry transducers
- Division circuits
- Precision measurement
- Portable docking station
- Test and measurement instruments
- E-book readers
