OPA684ID
| Parameters | |
|---|---|
| Slew Rate | 820V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 210MHz |
| Gain Bandwidth Product | 1.9GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 210000 kHz |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Settling Time | 11 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.5V |
| Max I/O Voltage | 3.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA684 |
| Pin Count | 8 |
| Power Supplies | 5/+-5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.55mA |
OPA684ID Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a Current Feedback-type. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 1.7mA. 1 channels are available on the instrumentation amplifier.
OPA684ID Features
8 Pins
supply voltage of 5V
OPA684ID Applications
There are a lot of Texas Instruments OPA684ID Instrumentational OP Amps applications.
- Instrumentation
- Portable docking station
- Medical instruments
- Addition operation circuits
- Signal transformation
- Signal filtering
- Broadcasting
- Inverse/same-phase proportional circuit
- Ultrasound transducers
- Voltage regulation circuit
