OPA690ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA690 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.8mA |
| Output Current | 190mA |
| Slew Rate | 1800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 500000 kHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Gain | 1 dB |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 500MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 4.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA690ID Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 5.5mA. 63dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 9V.
OPA690ID Features
8 Pins
supply voltage of 5V
63dB voltage gain
OPA690ID Applications
There are a lot of Texas Instruments OPA690ID Instrumentational OP Amps applications.
- Biopotential
- High-frequency data acquisition systems
- Voltage regulation circuit
- Radar
- Video data acquisition
- Signal operation
- PDA
- Multimedia playback equipment
- Subtraction operation circuits
- Medical instruments
