OPA691IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA691 |
| Pin Count | 6 |
| Number of Elements | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.3mA |
| Output Current | 190mA |
| Slew Rate | 2100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 280MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 280000 kHz |
| Average Bias Current-Max (IIB) | 35μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 40μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 2.5mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA691IDBVR Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. Buffer amps of this type are called Current Feedback-types. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 6. A total of 6 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 5.1mA, this op amp ic can operate. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The linear amplifier is packaged by using a TR axis.
OPA691IDBVR Features
6 Pins
supply voltage of 5V
OPA691IDBVR Applications
There are a lot of Texas Instruments OPA691IDBVR Instrumentational OP Amps applications.
- High gain DC amplifier
- Inverse/same-phase proportional circuit
- Multimedia playback equipment
- High speed sample
- Wireless base stations
- Signal amplification
- Integrator circuits
- Proportional operation circuits
- Information processing
- single/dual op amp sum and difference circuits
