OPA691IDBVT
| Parameters | |
|---|---|
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Gain | 1 dB |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 40μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 2.5mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA691 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.3mA |
| Slew Rate | 2100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 280MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 280000 kHz |
| Average Bias Current-Max (IIB) | 35μA |
OPA691IDBVT Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. Buffer amps of this type are called Current Feedback-types. A Cut Tape (CT) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 6 terminations. The total number of pins on linear amplifier is 6. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 5.1mA can be used to operate this linear amplifier. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. TR is adopted to pack the instrumentation amplifier.
OPA691IDBVT Features
6 Pins
supply voltage of 5V
OPA691IDBVT Applications
There are a lot of Texas Instruments OPA691IDBVT Instrumentational OP Amps applications.
- Band-stop filter
- Power generator
- Weighing systems
- Ultrasound transducers
- Laptop
- High speed sample
- High input resistance broadband
- Car stereo
- Thermocouples
- Cinema or auditorium audio system
