OPA691IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA691 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 5.1mA |
| Nominal Supply Current | 5.3mA |
| Slew Rate | 2100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 280MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 280000 kHz |
| Average Bias Current-Max (IIB) | 35μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 40μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 2.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA691IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a Current Feedback type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Op amp ic rates 500μV for input offset voltage. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Operational amplifier can operate supply current at 5.1mA. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA691IDR Features
8 Pins
supply voltage of 5V
OPA691IDR Applications
There are a lot of Texas Instruments OPA691IDR Instrumentational OP Amps applications.
- MP3
- Non-polarized electrodes
- Radiation thermometry transducers
- Portable docking station
- Precision measurement
- Multimedia playback equipment
- Active probe
- Radar
- Medical instruments
- Signal filtering
