OPA694IDBVT
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA694 |
| Pin Count | 5 |
| Operating Supply Voltage | 12.6V |
| Number of Channels | 1 |
| Operating Supply Current | 5.8mA |
| Nominal Supply Current | 6mA |
| Slew Rate | 1700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 7V~12.6V ±3.5V~6.3V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1.5 GHz |
| Gain Bandwidth Product | 1.5 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1500000 kHz |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 3mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
OPA694IDBVT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. Op amps are Current Feedback types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 5 mark. The pins on this board total to 5 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 5-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 3mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.8mA and 10 . There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 12.6V. For packing the buffer amplifier, the TR-axis is adopted.
OPA694IDBVT Features
5 Pins
supply voltage of 5V
OPA694IDBVT Applications
There are a lot of Texas Instruments OPA694IDBVT Instrumentational OP Amps applications.
- Test equipment
- ECG equipment
- Fission chambers
- Switching amplifier
- Automatic control
- Semiconductor detectors
- Blood pressure sensors
- single/dual op amp sum and difference circuits
- Displayers for aircraft and air transportation control systems
- Hand-held batteries
