banner_page

OPA694IDG4

80mA per Channel 5μA 55 dB Instrumentational OP Amps 20μA 12.6V 7V~12.6V ±3.5V~6.3V OPA694 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA694IDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 788
  • Description: 80mA per Channel 5μA 55 dB Instrumentational OP Amps 20μA 12.6V 7V~12.6V ±3.5V~6.3V OPA694 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Functions 1
Supply Voltage 5V
Base Part Number OPA694
Pin Count 8
Operating Supply Voltage 12.6V
Number of Elements 1
Operating Supply Current 5.8mA
Nominal Supply Current 6mA
Slew Rate 1700V/μs
Amplifier Type Current Feedback
Common Mode Rejection Ratio 55 dB
Current - Input Bias 5μA
Voltage - Supply, Single/Dual (±) 7V~12.6V ±3.5V~6.3V
Output Current per Channel 80mA
Input Offset Voltage (Vos) 3mV
Bandwidth 1.5 GHz
Gain Bandwidth Product 1.5 GHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 1500000 kHz
Average Bias Current-Max (IIB) 20μA
Power Supply Rejection Ratio (PSRR) 54dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Low-Bias NO
Micropower NO
Programmable Power NO
Dual Supply Voltage 5V
Max I/O Voltage 3mV
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260

OPA694IDG4 Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called Current Feedback-types. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 3mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 5.8mA . The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 12.6V.

OPA694IDG4 Features


8 Pins
supply voltage of 5V

OPA694IDG4 Applications


There are a lot of Texas Instruments OPA694IDG4 Instrumentational OP Amps applications.

  • Mobile phone
  • Medical imaging
  • Radiation thermometry transducers
  • Automotive sensors
  • Integrator circuits
  • Radar
  • Proportional counter tubes
  • Broadcasting
  • Navigation
  • Laptop

Write a review

Note: HTML is not translated!
    Bad           Good