OPA695IDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA695 |
| Pin Count | 6 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 12.9mA |
| Nominal Supply Current | 13.3mA |
| Slew Rate | 4300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 51 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1.7 GHz |
| Gain Bandwidth Product | 1.7 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1700000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 45μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 3mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA695IDBVTG4 Overview
There is a SOT-23-6 case package that contains the instrumentation amplifiers. An op amp of this type is a Current Feedback-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be 6 terminations in the next few months. The total number of pins on linear amplifier is 6. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 6 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 12.9mA. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 9V. An buffer amplifier is packed in a TR-shape according to the design.
OPA695IDBVTG4 Features
6 Pins
supply voltage of 5V
OPA695IDBVTG4 Applications
There are a lot of Texas Instruments OPA695IDBVTG4 Instrumentational OP Amps applications.
- Radar
- Mobile phone
- Comparator
- Instrumentation
- single/dual op amp sum and difference circuits
- Ultrasound transducers
- Active probe
- Commercial audio systems
- Television broadcasting equipment
- Band-stop filter
