OPA698ID
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 hours ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA698 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.9mA |
| Output Current | 120mA |
| Quiescent Current | 16.6A |
| Slew Rate | 1100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 450MHz |
| Gain Bandwidth Product | 250MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 250000 kHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 15 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
OPA698ID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 2mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureYou can run this op amp ic on 15.5mA . Voltage gain should remain at 60dB. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The quiescent current is 16.6A.
OPA698ID Features
8 Pins
supply voltage of 5V
60dB voltage gain
OPA698ID Applications
There are a lot of Texas Instruments OPA698ID Instrumentational OP Amps applications.
- Weak signal detection
- Ultrasound transducers
- PDA
- Division circuits
- Micro signal measurement
- Television
- Band-stop filter
- Logarithmic operation circuits
- Power transmission
- Blood pressure sensors
