OPA699IDR
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 260MHz |
| Gain Bandwidth Product | 1GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000000 kHz |
| Voltage Gain | 56dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=4 |
| Supply Voltage Limit-Max | 6.5V |
| Settling Time | 7 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 260MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.5V |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 174.4mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA699 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.9mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 120mA |
OPA699IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. Op amp rates 1.5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 15.5mA, this op amp ic can operate. 56dB should remain the voltage gain. A total of 1 elements are present in this linear amplifier. The instrumentation amplifier is packed in the form of TR.
OPA699IDR Features
8 Pins
supply voltage of 5V
56dB voltage gain
OPA699IDR Applications
There are a lot of Texas Instruments OPA699IDR Instrumentational OP Amps applications.
- earphone
- Fission chambers
- Active probe
- Signal transformation
- Comparator
- Cinema or auditorium audio system
- Video amplifiers
- Subtraction operation circuits
- Non-polarized electrodes
- Mobile phone
