OPA704UA/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA704 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Nominal Supply Current | 200μA |
| Output Current | 10mA |
| Current - Supply | 160μA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 160μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 750μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA704UA/2K5 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 750μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. Keeping the voltage gain at 120dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are a total of 1 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage. The instrumentation amplifier is packed in the form of TR. A supply of 160μA or higher is recommended for use with this electronic part.
OPA704UA/2K5 Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA704UA/2K5 Applications
There are a lot of Texas Instruments OPA704UA/2K5 Instrumentational OP Amps applications.
- Vehicle electronics
- PDA
- Switching amplifier
- Thermocouples
- High gain DC amplifier
- Instrumentation
- Tablets
- MP3
- Multiplication circuits
- Subtraction operation circuits
