OPA726AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Base Part Number | OPA726 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 4.3mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 40mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 90.46dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.2mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA726AID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 6V. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.3mA and 10 . There should be no change in the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 6V.
OPA726AID Features
8 Pins
supply voltage of 6V
120dB voltage gain
Output Type: Rail-to-Rail
OPA726AID Applications
There are a lot of Texas Instruments OPA726AID Instrumentational OP Amps applications.
- Band-stop filter
- Medical imaging
- Computer workstations
- Multiplication circuits
- Portable electronic products powered by batteries
- Communication
- Fast A/D and D/A converters
- Television
- Thermocouples
- Power transmission
