OPA726AIDGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA726 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 4.3mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 40mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 90.46dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.2mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA726AIDGKT Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 6V volts. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 3mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 4.3mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 120dB's 120dB family. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 6V voltage. The linear amplifier is packaged by using a TR axis.
OPA726AIDGKT Features
8 Pins
supply voltage of 6V
120dB voltage gain
Output Type: Rail-to-Rail
OPA726AIDGKT Applications
There are a lot of Texas Instruments OPA726AIDGKT Instrumentational OP Amps applications.
- Portable media players
- Hand-held batteries
- Strain gauges
- Video amplifiers
- Proportional operation circuits
- Industrial applications including automation
- Test and measurement instruments
- Ultrasound transducers
- Cinema or auditorium audio system
- pH (acidity)
