OPA734AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA734 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 750μA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 1.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1600 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 133.98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 1.6MHz |
| Max I/O Voltage | 5μV |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA734AID Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a Zero-Drift type op amp. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 5μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 600μA . Keeping the voltage gain at 130dB is the best course of action. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
OPA734AID Features
8 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA734AID Applications
There are a lot of Texas Instruments OPA734AID Instrumentational OP Amps applications.
- Test and measurement instruments
- Information processing
- Radar
- Addition operation circuits
- Video computer boards
- Mobile phone
- Strain gauges
- Large motor controllers
- Ultrasound transducers
- Professional videography
