OPA735AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA735 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 750μA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 1.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1600 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 133.98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.6MHz |
| Max I/O Voltage | 5μV |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA735AIDBVR Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. Buffer amps of this type are called Zero-Drift-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 5μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 600μA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 130dB for the time being. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. 1 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage. TR is adopted to pack the instrumentation amplifier.
OPA735AIDBVR Features
5 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA735AIDBVR Applications
There are a lot of Texas Instruments OPA735AIDBVR Instrumentational OP Amps applications.
- Addition operation circuits
- Active probe
- Automatic control
- High input resistance broadband
- Navigation
- Weighing systems
- Hand-held batteries
- Laptop
- Communication
- Commercial audio systems
