Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
OPA735 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
6V |
Number of Elements |
1 |
Operating Supply Current |
600μA |
Nominal Supply Current |
750μA |
Slew Rate |
1.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Zero-Drift |
Common Mode Rejection Ratio |
115 dB |
Current - Input Bias |
100pA |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±1.35V~6V |
Output Current per Channel |
20mA |
Input Offset Voltage (Vos) |
5μV |
Bandwidth |
1.6MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1600 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Power Supply Rejection Ratio (PSRR) |
133.98dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
1μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.6MHz |
Max I/O Voltage |
5μV |
Input Offset Current-Max (IIO) |
0.0003μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA735AIDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 5μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 600μA and 10 . 130dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 6V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA735AIDR Features
8 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA735AIDR Applications
There are a lot of Texas Instruments OPA735AIDR Instrumentational OP Amps applications.
- Differentiator circuits
- Non-polarized electrodes
- Digital cameras
- Image computer boards
- ECG equipment
- Band-pass filter
- Video conversion and routing
- Tablets
- Radiation thermometry transducers
- Proportional operation circuits