OPA820IDG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | OPA820 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.6mA |
| Nominal Supply Current | 5.75mA |
| Output Current | 110mA |
| Slew Rate | 240V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 9μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 800MHz |
| Gain Bandwidth Product | 280MHz |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Settling Time | 26 ns |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 1mV |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA820IDG4 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. The input offset voltage is 200μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 5.6mA volt supply current is needed for this linear amplifier to operate. 65dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 5V.
OPA820IDG4 Features
8 Pins
65dB voltage gain
OPA820IDG4 Applications
There are a lot of Texas Instruments OPA820IDG4 Instrumentational OP Amps applications.
- RF cable systems
- Video amplifiers
- Voltage regulation circuit
- Scintillation detectors
- Image computer boards
- Communication
- Automatic control
- Signal filtering
- Logarithmic operation circuits
- Industrial control system
