OPA827AIDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA827 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Circuits | 1 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 4.8mA |
| Output Current | 30mA |
| Slew Rate | 28V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 22MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 126dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 22MHz |
| Wideband | NO |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA827AIDRG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a J-FET-type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 75μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 4.8mA. You should keep the voltage gain at 126dB for the time being. There are 1 circuits on this op amp. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA827AIDRG4 Features
8 Pins
supply voltage of 15V
126dB voltage gain
OPA827AIDRG4 Applications
There are a lot of Texas Instruments OPA827AIDRG4 Instrumentational OP Amps applications.
- Radar
- Power control
- Signal filtering
- RF cable systems
- Television broadcasting equipment
- Industrial control system
- Portable electronic products powered by batteries
- Proportional counter tubes
- Fast A/D and D/A converters
- Active probe
