OPA830IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA830 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.7mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 310000 kHz |
| Voltage Gain | 72dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 310MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Max I/O Voltage | 500μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA830IDBVT Overview
A SC-74A, SOT-753 case is used to package the op amp. The instrumentation amplifier in this picture is of the Voltage Feedback-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 5 mark. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are included on the operational amplifiers. Op amp rates 1.5mV as input offset voltage. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 4.25mA , this buffer op amp will be able to operate. Keeping the voltage gain at 72dB is the best course of action. On the buffer amps, there are 1 channels that can be used. An buffer amplifier is packed in a TR-shape according to the design.
OPA830IDBVT Features
5 Pins
supply voltage of 5V
72dB voltage gain
OPA830IDBVT Applications
There are a lot of Texas Instruments OPA830IDBVT Instrumentational OP Amps applications.
- Home audio systems
- Exponential operation circuits
- ECG equipment
- Blood pressure sensors
- Automotive sensors
- Division circuits
- earphone
- PDA
- E-book readers
- Fission chambers
