OPA835IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA835 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.35mA |
| Slew Rate | 260V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Settling Time | 55 ns |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 56MHz |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA835IDBVR Overview
The linear amplifier is packaged in a SOT-23-6 case which makes it easy for the consumer to handle. An op amp ic of the Voltage Feedback type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 6 terminations. Buffer amplifier has a total of 6 pins on it. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 6 pins. The input offset voltage is 500μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 250μA. It is recommended to keep the voltage gain at 120dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. This linear amplifier pack is based on the TR axis.
OPA835IDBVR Features
6 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
OPA835IDBVR Applications
There are a lot of Texas Instruments OPA835IDBVR Instrumentational OP Amps applications.
- Addition operation circuits
- Digital cameras
- Power generator
- Ultrasound transducers
- Image computer boards
- Automatic control
- single/dual op amp sum and difference circuits
- Communication
- Measurements of Wheatstone bridge
- Video conversion and routing
