OPA835IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA835 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.35mA |
| Slew Rate | 260V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 56MHz |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Settling Time | 55 ns |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 2.75V |
| Max I/O Voltage | 500μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA835IDBVT Overview
It is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. An op amp ic of the Voltage Feedback type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 6. The pins on this board total to 6 in total. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 6 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 250μA, this op amp ic can operate. 120dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is used TR to pack the op amps.
OPA835IDBVT Features
6 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
OPA835IDBVT Applications
There are a lot of Texas Instruments OPA835IDBVT Instrumentational OP Amps applications.
- MP3
- Television broadcasting equipment
- Commercial audio systems
- Professional videography
- Large motor controllers
- Test and measurement instruments
- Communication device
- Radar
- Home audio systems
- Logarithmic operation circuits
