OPA836IDBVR
| Parameters | |
|---|---|
| Voltage - Input Offset | 65μV |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 205MHz |
| Programmable Power | NO |
| Max I/O Voltage | 400μV |
| Wideband | YES |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA836 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1mA |
| Slew Rate | 580V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 650nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 118MHz |
| Unity Gain BW-Nom | 118000 kHz |
| Voltage Gain | 122dB |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
OPA836IDBVR Overview
The linear amplifier is packaged in a SOT-23-6 case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 6 terminations. Buffer amplifier has a total of 6 pins on it. Please take in mind that this instrumentation amplifier should be run at 2.7V. Instrumentation amplifier is a part of Operational Amplifier. A total of 6 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 400μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 1mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 122dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. It is possible to count 1 elements on this buffer amplifier. TR is adopted to pack the instrumentation amplifier.
OPA836IDBVR Features
6 Pins
supply voltage of 2.7V
122dB voltage gain
Output Type: Rail-to-Rail
OPA836IDBVR Applications
There are a lot of Texas Instruments OPA836IDBVR Instrumentational OP Amps applications.
- Thermocouples
- Subtraction operation circuits
- Industrial control system
- Exponential operation circuits
- Differentiator circuits
- Proportional counter tubes
- Medical imaging
- Polarized electrodes
- Strain gauges
- Ultrasound transducers
