OPA836IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA836 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1mA |
| Slew Rate | 580V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 650nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 118MHz |
| Unity Gain BW-Nom | 118000 kHz |
| Voltage Gain | 122dB |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 65μV |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 205MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 2.75V |
| Max I/O Voltage | 400μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA836IDBVT Overview
A SOT-23-6 case is used to package the op amp. An op amp ic of the Voltage Feedback type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 6. The pins on this board total to 6 in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 6 pins. Regarding input offset voltage, buffer amplifier rates 400μV voltage. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 1mA. Op amp is a member of the 122dB's 122dB family. As far as the device is concerned, buffer amplifier has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As a result of this, the buffer amplifier is packed in TR.
OPA836IDBVT Features
6 Pins
supply voltage of 2.7V
122dB voltage gain
Output Type: Rail-to-Rail
OPA836IDBVT Applications
There are a lot of Texas Instruments OPA836IDBVT Instrumentational OP Amps applications.
- Ultrasound transducers
- Broadcasting
- Test and measurement instruments
- Information processing
- Differentiator circuits
- High speed sample
- Portable electronic products powered by batteries
- Precision measurement
- Home audio systems
- Communication device
