OPA846ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA846 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 12.6mA |
| Nominal Supply Current | 12.9mA |
| Output Current | 80mA |
| Slew Rate | 625V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 500MHz |
| Gain Bandwidth Product | 1.75GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1750000 kHz |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Voltage - Input Offset | 150μV |
| Settling Time | 15 ns |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 600μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA846ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a Voltage Feedback-type. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 600μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 12.6mA supply current, this operational amplifier ics can be operated. 90dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device.
OPA846ID Features
8 Pins
supply voltage of 5V
90dB voltage gain
OPA846ID Applications
There are a lot of Texas Instruments OPA846ID Instrumentational OP Amps applications.
- High input resistance broadband
- Displayers for aircraft and air transportation control systems
- Non-polarized electrodes
- Weighing systems
- Switching amplifier
- Television
- High-frequency data acquisition systems
- Broadcasting
- earphone
- Medical instruments
