OPA846IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA846 |
| Pin Count | 5 |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
| Operating Supply Current | 12.6mA |
| Nominal Supply Current | 12.9mA |
| Slew Rate | 625V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.75 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1750000 kHz |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Voltage - Input Offset | 150μV |
| Settling Time | 15 ns |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 600μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA846IDBVR Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. An op amp ic of the Voltage Feedback type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 5 terminations. The total number of pins on linear amplifier is 5. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 5 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 600μV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAn 12.6mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 90dB. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 12V voltage.
OPA846IDBVR Features
5 Pins
supply voltage of 5V
90dB voltage gain
OPA846IDBVR Applications
There are a lot of Texas Instruments OPA846IDBVR Instrumentational OP Amps applications.
- Video computer boards
- Logarithmic operation circuits
- Radar
- Information processing
- Strain gauges
- Large motor controllers
- Precision measurement
- Differentiator circuits
- Automation control systems
- Portable electronic products powered by batteries
