OPA860ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA860 |
| Pin Count | 8 |
| Max Output Current | 15mA |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 11.2mA |
| Nominal Supply Current | 11.2mA |
| Output Current | 10mA |
| Min Input Voltage | -4.2V |
| Slew Rate | 3500V/μs |
| Amplifier Type | Transconductance |
| Current - Input Bias | 1μA |
| Max Input Voltage | 4.2V |
| Voltage - Supply, Single/Dual (±) | ±2.5V~6V |
| Output Current per Channel | 15mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 470MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0dB |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 12mV |
| Input Voltage Noise Density | 3.4nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA860ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Transconductance-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 3mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 11.2mA. 0dB should remain the voltage gain. There are a total of 1 channels available on the op amps. During testing, the instrumentation amplifier resistance should remain within a range of 10.5Ohm. An analog IC known as ANALOG CIRCUIT is also used in this linear amplifier.
OPA860ID Features
8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 10.5Ohm
OPA860ID Applications
There are a lot of Texas Instruments OPA860ID Instrumentational OP Amps applications.
- Information processing
- Mobile phone
- Power transmission
- Oscilloscopes
- Large motor controllers
- PDA
- Tablets
- Switching amplifier
- Measurements of Wheatstone bridge
- Portable docking station
