OPA861IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 185mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA861 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 5.4mA |
| Output Current | 10mA |
| Slew Rate | 900V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Transconductance |
| Current - Input Bias | 1μA |
| Max Input Voltage | -1.3V |
| Voltage - Supply, Single/Dual (±) | 4V~12.6V ±2V~6.3V |
| Output Current per Channel | 15mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 12mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 80000 kHz |
| Low-Offset | NO |
| Frequency Compensation | yES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Bias Current-Max (IIB) @25C | 5μA |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 12mV |
| Wideband | YES |
| Input Voltage Noise Density | 2.4nV/sqrt Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA861IDBVT Overview
A SOT-23-6 case is used to package the op amp. The instrumentation amplifier in this picture is of the Transconductance-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 6 mark. There are a total of 6 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 6-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 12mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 5.4mA . There are a total of 1 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR.
OPA861IDBVT Features
6 Pins
supply voltage of 5V
OPA861IDBVT Applications
There are a lot of Texas Instruments OPA861IDBVT Instrumentational OP Amps applications.
- Automation control systems
- Professional videography
- High-frequency data acquisition systems
- Power generator
- Medical imaging
- Scintillation detectors
- Digital cameras
- Test equipment
- Signal transformation
- Weighing systems
