OPB718Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Panel |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C |
| Published | 2007 |
| Series | Photologic® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Wire |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.75V~5.25V |
| Max Output Current | 100μA |
| Number of Elements | 1 |
| Operating Supply Current | 30mA |
| Output Configuration | Totem Pole |
| Power Dissipation | 300mW |
| Output Current | 100μA |
| Adjustment Type | Adjustable |
| Max Collector Current | 100μA |
| Sensing Distance | 0.500 (12.7mm) |
| Wavelength | 890 nm |
| Sensing Method | Reflective |
| High Level Output Current | 100μA |
| Low Level Output Current | 16mA |
| Max Supply Voltage (DC) | 5.25V |
| Connection Method | Wire |
| Light Source | Infrared |
| Min Supply Voltage (DC) | 4.75V |
| RoHS Status | RoHS Compliant |
OPB718Z Overview
It is recommended to set the temperature of a photoelectric sensor to -40°C~85°C in order to ensure reliable operation. Electronic components should be connected to a circuit or system by 4.75V~5.25V voltage. The photoelectric sensor operates at a minimum working temperature of -40°C to ensure reliability. Reliable operation is possible at 85°C. This photoelectric sensor can only function properly if the 3 pins are connected. For a photoelectric sensor to work, the output current should be 100μA. It is possible to apply a voltage of 5.25V to the photoelectric sensor in a DC circuit without damaging it. This photoelectric sensor can work at as low a voltage as possible, such as 4.75V. We set the photoelectric sensor's supply current to 30mA. The photoelectric sensors will dissipate 300mW continuously under the specified thermal conditions. Having a maximum output current of 0 allows photoelectric sensors to function.
OPB718Z Features
Sensing Distance: 0.500 (12.7mm)
3 pins
Operating Temperature: -40°C~85°C
Photologic? Series
Maximal Supply Voltage (DC): 5.25V
Minimal Supply Voltage (DC): 4.75V
OPB718Z Applications
There are a lot of TT Electronics/Optek Technology OPB718Z Photoelectric Sensors applications.
- Automatic doors
- Monitoring bigger areas for objects with light grids
- Passive infrared sensors
- Counting small objects
- Zone scanners
- Pharmaceutical industry
- detect objects
- Entrance and gate
- Luminescence sensors
- Automotive industry
