OPB771TZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Chassis Mount, Screw |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Published | 2006 |
| Series | Photologic® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Wire |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.75V~5.25V |
| Number of Elements | 1 |
| Operating Supply Current | 10mA |
| Output Configuration | NPN - Open Collector |
| Power Dissipation | 300mW |
| Forward Current | 40mA |
| Sensing Distance | 0.080 ~ 0.220 (2.03mm ~ 5.58mm) ADJ |
| Reverse Breakdown Voltage | 3V |
| Wavelength | 890 nm |
| Sensing Method | Reflective |
| High Level Output Current | 100μA |
| Low Level Output Current | 12.8mA |
| Connection Method | Wire |
| RoHS Status | RoHS Compliant |
OPB771TZ Overview
The temperature of photoelectric sensor should be set to -40°C~85°C to ensure reliable performance. In order for these electronic components to function, the voltage should be set to 4.75V~5.25V within the circuit or system. It is essential that photoelectric sensors operate at a minimum working temperature of -40°C to ensure their reliability. Reliable operation is ensured by a maximum operating temperature of 70°C. This photoelectric sensor can only function properly if the 5 pins are connected. There is no supply current set for the photoelectric sensor. In the specified thermal conditions, the photoelectric sensors can continuously dissipate 300mW.
OPB771TZ Features
Sensing Distance: 0.080 ~ 0.220 (2.03mm ~ 5.58mm) ADJ
5 pins
Operating Temperature: -40°C~85°C
Photologic? Series
OPB771TZ Applications
There are a lot of TT Electronics/Optek Technology OPB771TZ Photoelectric Sensors applications.
- Automatic doors
- Passive infrared sensors
- Logistics and materials handling
- detect objects
- Detecting colours
- Measuring distance
- Counting small objects
- Mechanical engineering
- Entrance and gate
- Zone scanners
