banner_page

OPF472

OPF472 datasheet pdf and Optical Sensors - Photodiodes product details from TT Electronics/Optek Technology stock available at Noco


  • Manufacturer: TT Electronics/Optek Technology
  • Nocochips NO: 861-OPF472
  • Package: TO-46-3
  • Datasheet: PDF
  • Stock: 178
  • Description: OPF472 datasheet pdf and Optical Sensors - Photodiodes product details from TT Electronics/Optek Technology stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Panel, Through Hole
Mounting Type Through Hole
Package / Case TO-46-3
Number of Pins 3
Operating Temperature -40°C~85°C
Packaging Bulk
Published 1997
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Capacitance 3pF
Operating Supply Voltage 5V
Diode Type PIN
Power Dissipation 200mW
Response Time 20ns
Voltage - DC Reverse (Vr) (Max) 100V
Breakdown Voltage 100V
Rise Time 6ns
Fall Time (Typ) 6 ns
Max Reverse Voltage (DC) 100V
Reverse Breakdown Voltage 100V
Reverse Voltage 100V
Wavelength 880nm
Peak Wavelength 880 nm
Dark Current 100pA
Spectral Range 500nm ~ 1100nm
Current - Dark (Typ) 100pA
Height 20.32mm
Length 12.7mm
Width 10.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

OPF472 Overview


The Bulk protects these photodiodes from damage. In order to ensure their safety, the photodiodes are packaged into TO-46-3 packages. A photodiode can withstand a maximum voltage of 100V when operating in reverse-bias mode continuously. It is recommended that the photodiodes are maintained at a constant voltage of 100V in reverse-bias mode. It has 3 pins for the photodiodes. Photodiodes on a circuit are capable of emitting 200mW heat. Photodiodes should operate at a temperature of 85°C. There should, however, be a minimum operating temperature of -40°C for the photodiodes. For the photodiodes, the reverse anode voltage should be 100V. The breakdown voltage should be 100V to ensure photodiodes work. As a result of reverse-bias operation, the photodiodes are capable of supplying 100V voltage. The current in a photodiode is 100pA even when there is no light input.

OPF472 Features


Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: Panel, Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 20ns

OPF472 Applications


There are a lot of TT Electronics/Optek Technology OPF472 Photodiodes applications.

  • Pulse Oximetry
  • Sterilization Lamp Monitoring
  • High speed photo detector
  • Electronic Equipment
  • Heart Rate Monitoring
  • Position sensing
  • Shaft encoders
  • Infrared data transmission
  • Optical Analytics
  • Range finding

Write a review

Note: HTML is not translated!
    Bad           Good