OPF793
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2014 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Diode Type | PIN |
| Response Time | 2ns |
| Voltage - DC Reverse (Vr) (Max) | 50V |
| Rise Time | 6ns |
| Fall Time (Typ) | 6 ns |
| Max Reverse Voltage (DC) | 50V |
| Reverse Voltage | 100V |
| Wavelength | 800nm |
| Dark Current | 500pA |
| Spectral Range | 800nm ~ 1000nm |
| Current - Dark (Typ) | 500pA |
| Responsivity @ nm | 0.55 A/W @ 850nm |
| RoHS Status | RoHS Compliant |
OPF793 Overview
A Tray package protects these photodiodes from damage. A photodiode can withstand a maximum voltage of 50V when operating in reverse-bias mode continuously. In reverse-bias mode, the voltage for the photodiodes should not exceed 50V continuously. During operation, photodiodes should not have a temperature higher than 85°C. But the photodiodes should operate at a temperature of -40°C. By using reverse-bias technology, the photodiodes are able to supply a voltage of 100V. In the absence of light input, the photodiode exhibits a current of 500pA.
OPF793 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~85°C
Packaging: Tray
Diode Type: PIN
Mount: Through Hole
Spectral Range: 800nm ~ 1000nm
Response Time: 2ns
Responsivity @ nm: 0.55 A/W @ 850nm
OPF793 Applications
There are a lot of TT Electronics/Optek Technology OPF793 Photodiodes applications.
- Health Monitoring
- YAG laser detection
- Light Barriers
- High speed photo detectors
- Low Cost Light Monitoring
- Machine Controls
- Emitter Alignment
- Electronic Equipment
- Light Bariers
- Pulse Oximetry
