OPR2100HST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Diode Type | PIN |
| Voltage - DC Reverse (Vr) (Max) | 50V |
| Max Reverse Voltage (DC) | 50V |
| Wavelength | 890nm |
| Dark Current | 10nA |
| Spectral Range | 400nm ~ 1100nm |
| Active Area | 3.45mm2 (x6) |
| Current - Dark (Typ) | 10nA |
| Responsivity @ nm | 0.45 A/W @ 890nm |
| RoHS Status | RoHS Compliant |
OPR2100HST Overview
The photodiodes are packaged in the Tape & Reel (TR) in order to prevent damage to them. When operating in reverse bias mode continuously, the photodiodes can withstand 50V voltage. In reverse-bias mode, the voltage for the photodiodes should not exceed 50V continuously. It is recommended that photodiodes are operated at a temperature no higher than 125°C. It should be noted that the photodiodes should be operated at -55°C as a minimum operating temperature. Despite the absence of light input, a photodiode generates 10nA electrical current.
OPR2100HST Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -55°C~125°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 400nm ~ 1100nm
Responsivity @ nm: 0.45 A/W @ 890nm
OPR2100HST Applications
There are a lot of TT Electronics/Optek Technology OPR2100HST Photodiodes applications.
- Pure UV-C Monitoring
- YAG laser detection
- Health Monitoring
- High speed photo detector
- Infrared data transmission
- Photo interrupters
- Infrared remote control
- Machine Controls
- Shaft encoders
- Measurement Levelling
