OPR5911
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SMD/SMT |
| Number of Pins | 12 |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - DC Reverse (Vr) (Max) | 14V |
| Max Reverse Voltage (DC) | 14V |
| Reverse Voltage | 14V |
| Wavelength | 890nm |
| Dark Current | 30nA |
| Spectral Range | 400nm ~ 1100nm |
| Active Area | 1.27mm2 (x4) |
| Current - Dark (Typ) | 30nA |
| Responsivity @ nm | 0.45 A/W @ 890nm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
OPR5911 Overview
To protect the photodiodes, they are packed in the Bulk. The photodiodes are put into SMD/SMT packages for safety protection. Continuously reverse-biasing photodiodes can withstand 14V voltage. Continuously, the reverse-bias voltage should not exceed 14V for the photodiodes. 12 pins are present on the photodiodes. When photodiodes operate, they should not be subjected to temperatures higher than 125°C. But the minimum operating temperature for the photodiodes should be set to -55°C. ?It is possible for the photodiodes to supply 14V voltage when they are reverse-biased. Photodiodes exhibit 30nA current even in the absence of light input.
OPR5911 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -55°C~125°C
Packaging: Bulk
Mount: Surface Mount
Spectral Range: 400nm ~ 1100nm
Responsivity @ nm: 0.45 A/W @ 890nm
OPR5911 Applications
There are a lot of TT Electronics/Optek Technology OPR5911 Photodiodes applications.
- Position sensing
- Measurement Levelling
- Shaft encoders
- Emitter Alignment
- YAG laser detection
- Solar Cells
- Health Monitoring
- LiDAR
- Industrial Automation
- Electronic Equipment
