P1010NXN5HFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 425-FBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P1 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 425 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | P1010 |
| JESD-30 Code | S-PBGA-B425 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Power Supplies | 1V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.0GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500v2 |
| Clock Frequency | 100MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Ethernet | 10/100/1000Mbps (3) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | CAN, DUART, I2C, MMC/SD, SPI |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 1.9mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
P1010NXN5HFB Overview
Due to its 425-FBGA packaging, it is convenient to ship overseas. In order to provide high reliability, advanced packaging method Tray is used. CPUs have 1 Core 32-Bit cores/bus width. Understand the operating temperature around -40°C~105°C TA. In the QorIQ P1 series, it is found. The CPU is cored by a processor with a number of 0 cores. There are DDR3, DDR3L RAM controllers used by this CPU. The microprocessor features interfaces CAN, DUART, I2C, MMC/SD, SPI for better service. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. P1010 is a good way to search for variants of the microprocessor. Overall, there are 425 terminations. Using a 1V voltage supply, you should be able to operate the cpu microprocessor. In terms of architecture, it is a 32-Bit system. A maximum supply current of 1.05V is available. An example of a Microprocessors microprocessor can be found here. A clock frequency of 100MHz is used by the CPU microprocessor. The datasheet specifies that this CPU microprocessor requires 1V power supply.
P1010NXN5HFB Features
PowerPC e500v2 Core
32-Bit Structure
P1010NXN5HFB Applications
There are a lot of NXP USA Inc. P1010NXN5HFB Microprocessor applications.
- Robotic prosthetic limbs
- PDAs, game consoles
- Automobile
- Computer/laptop
- Washing machines
- Day to day life field
- Teletext terminals
- Mice
- Electromechanical control
- Office automation equipment and computer peripherals
